Scanning Tracks Of A Cd; Pausing Cd Playback; Selecting The Search Method; Searching Every 10 Tracks In The Current Disc - Pioneer SUPER TUNER IIID DEH-P80MP Mode D'emploi

Section
05 Built-in CD Player

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Use Multi-Control to select Scan.
Scan appears in the display.
2 Press Multi-Control to turn scan play
on.
Scan :ON appears in the display. The first 10
seconds of each track is played.
3 When you find the desired track press
Multi-Control to turn scan play off.
Scan :OFF appears in the display. The track
will continue to play.
# If the display has automatically returned to
the playback display, select Scan again by using
Multi-Control.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.
1 Use Multi-Control to select Pause.
Pause appears in the display.
2 Press Multi-Control to turn pause on.
Pause :ON appears in the display. Play of the
current track pauses.
# To turn pause off, press Multi-Control
again.
22
En

Selecting the search method

You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1 Use Multi-Control to select FF/REV.
FF/REV appears in the display.
# If the search method ROUGH SEARCH has
been previously selected, ROUGH SEARCH will
be displayed.
2 Press Multi-Control to select the search
method.
Press Multi-Control until the desired search
method appears in the display.
! FF/REV  Fast forward and reverse
! ROUGH SEARCH  Searching every 10
tracks
Searching every 10 tracks in
the current disc
If a disc contains over 10 tracks, you can
search every 10 tracks. When a disc contains
a lot of tracks, you can roughly search for the
track you want to play.
1 Select the search method
ROUGH SEARCH.
Refer to Selecting the search method on this
page.
2 Push and hold Multi-Control left or
right to search every 10 tracks on a disc.
# If a disc contains less than 10 tracks, pushing
and holding Multi-Control right recalls the last
track of the disc. Also, if the remaining number of
tracks after searching every 10 tracks is less than
10, pushing and holding Multi-Control right re-
calls the last track of the disc.
# If a disc contains less than 10 tracks, pushing
and holding Multi-Control left recalls the first