Pausing Cd Playback; Using Its Playlists; Creating A Playlist With Its Programming; Playback From Your Its Playlist - Pioneer SUPER TUNER IIID DEH-P80MP Mode D'emploi

Section
07 Multi-CD Player
Note
After track or disc scanning is finished, normal
playback of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.
1 Use Multi-Control to select Pause.
Pause appears in the display.
2 Press Multi-Control to turn pause on.
Pause :ON appears in the display. Play of the
current track pauses.
# To turn pause off, press Multi-Control
again.

Using ITS playlists

ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and play back up to
99 tracks per disc, up to 100 discs (with the
disc titles). (With multi-CD players sold before
the CDX-P1250 and CDX-P650, up to 24 tracks
can be stored in the playlist.)
1 Play a CD that you want to program.
Push Multi-Control up or down to select the
CD.
34
En
2 Use Multi-Control to select ITS.
ITS appears in the display.
3 Select the desired track by pushing
Multi-Control left or right.
4 Push Multi-Control up to store the cur-
rently playing track in the playlist.
ITS Input is displayed briefly and the currently
playing selection is added to your playlist. The
display then shows ITS again.
5 Press BAND to return to the playback
display.
Note
After data for 100 discs has been stored in mem-
ory, data for a new disc will overwrite the oldest
one.

Playback from your ITS playlist

ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist
in the multi-CD player will begin to play.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Use Multi-Control to select ITS Play.
ITS Play appears in the display.
3 Press Multi-Control to turn ITS play on.
ITS Play :ON appears in the display. Playback
begins of those tracks from your playlist within
the previously selected MCD or DISC ranges.
# If no tracks in the current range are pro-
grammed for ITS play then ITS Empty is dis-
played.
# To turn ITS play off, press Multi-Control
again.