Selecting The Channel In The Channel Category; Selecting The Xm Channel Directly; Display The Id Code; Channel Number Select Setting - Pioneer SUPER TUNER IIID DEH-P80MP Mode D'emploi

Section
10 XM tuner
CH NUMBER (channel number select setting)
CATEGORY (channel category select
setting)
# You can also switch the XM channel select
setting in the menu that apears by using
Multi-Control.
Selecting the channel in the
channel category
1 Press CLOCK and hold to switch the
channel select setting.
2 Press CLOCK to select the desired chan-
nel select setting.
Press CLOCK repeatedly to switch between
the following channel select settings:
CH NUMBER (channel number select setting)
CATEGORY (channel category select
setting)
# You can also switch the XM channel select
setting in the menu that apears by using
Multi-Control.
3 Push Multi-Control up or down to select
the desired channel category.
4 Push Multi-Control left or right to select
the desired channel in the selected channel
category.
Selecting the XM channel
directly
You can select the XM channel directly by en-
tering the desired channel number.
! You cannot operate this mode from func-
tion display.
1 Touch DIRECT on the remote control.
CHANNEL INPUT appears in the display.
46
En
2 Use NUMBER on the remote control to
input the desired channel number.
# To cancel the input numbers, press CLEAR on
the remote control.
3 While the input number is displayed,
press DIRECT on the remote control.
The entered XM channel is selected.

Display the ID code

Channel number select setting

If you select CH : 000, the ID code is displayed.
% Push Multi-Control left or right to select
CH : 000.

Channel category select setting

RADIO ID is provided as a channel category
for displaying the ID code.
% Push Multi-Control up or down to select
RADIO ID from channel category.
# If you select another channel, display of the ID
code is canceled.
# Display of the ID code repeats displaying
RADIO ID and the ID code one after the other.