Switching The Telephone Muting/Attenuation; Switching The Motion Screen - Pioneer SUPER TUNERIII D DEH-P6500 Mode D'emploi

Section
Initial Settings
08
Notes
! Even if you change this setting, there is no
output unless you turn the non fading output
(refer to Using non fading output on page 30)
or subwoofer output (refer to Using subwoofer
output on page 30) in the audio menu on.
! If you change the subwoofer controller, sub-
woofer output and non fading output in the
audio menu return to the factory settings.
! Both rear speaker leads output and RCA rear
output are switched simultaneously in this
setting.
Switching the telephone
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when a call is made or re-
ceived using a cellular telephone connected to
this unit.
! The sound is turned off, MUTE or ATT is
displayed and no audio adjustment is pos-
sible.
! Operation returns to normal when the
phone connection is ended.
1 Press FUNCTION to select Telephone.
Press FUNCTION repeatedly until Telephone
appears in the display.
2 Press c or d to switch the telephone
muting/attenuation.
Pressing c or d will switch between
Telephone :ATT (attenuation) and
Telephone :MUTE (muting) and that status
will be displayed.
34
En
HHHHHHHHHHHHHH

Switching the motion screen

You can turn on or off the moving source icon
display. When off is selected, the moving
source icon disappears after opening screen
is displayed.
1 Press FUNCTION to select Motion.
Press FUNCTION repeatedly until Motion ap-
pears in the display.
2 Press a or b to turn Motion on or off.
Pressing a or b will turn Motion on or off
and that status will be displayed (e.g.,
Motion :ON).