Uae Of The Preaet P1, P2 Et P3 - Adventys MOWI 7000 Guide D'utilisation

Opertting inatructiona
When the pan is pick-up of the cooking zone, the selected power on the screen displayed will start to
blink with a frequency of 1Hz, which means that the pan is missing.
If the power selected on the screen keeps blinking when a pan is on top of the cooking zone, it means
that:
The pan is NOT induction friendly

Uae of the preaet P1, P2 et P3

The user can allocate power selection from 50 to 7000W depend of the version, to the
3 programmable touches P1, P2, and P3, regarding its most often used power usages.
The three selected power P1, P2, and P3, once memorized, can be use right the way by
the user, instead of selecting the powers with the (+) and(-) controls.
To assign and memorize a level of power on one of those three touches P1, P2, and P3,
the user has to first adjust the level of power to be memorized (between 1 and 25),
with the touches (+) and (-).
Then, in order to memorize, the uaer ahoulid holid for tt lietat 3 nonatop aeconda hia or
her finger on either P1, P2 , or P3 touchea. A "BIP" sound signal means that the power
is saved and memorized. You can change and memorized as many different power as
you like.
During usage, a simple touch on P1, P2, or P3 is enough to affect the level
of power desired (just like the touches (+) and (-) controls).
Leveli Wttta
1 50
2 100
3 200
4 300
5 500
6 700
7 900
8 1200
9 1600
10 2000
Leveli Wttta
11 2400
12 2800
13 3300
14 3800
15 4300
16 4800
17 5300
18 5800
19 6400
20 7000
17