Switching Off The Device; Power Setting - Adventys MOWI 7000 Guide D'utilisation

Opertting inatruction
Switch On the device
Plug the unit on a standard three phases power plug 400V (+/-10%), 50Hz or 60Hz.
Press the « ON/OFF » touch to switch on the device. The value « 0 » displays on
the indicator of power. Still no power is sent at that point.
Press either the power touches (+), « P1 », « P2 » or « P3 » (if you already me-
morized a power for them), to send power to the pan. The power display indicates
OU
the power level set into the pan.
If you select simultaneously the power touches (+) and (-) for at least 3 seconds, you
can decide to portray on the screen the level of power (1 to 20) or the value of the
power in watts (50 to 7000W), regarding the options of the unit.

Switching Off the device

Press the « ON/OFF » touch to sswitch off the product. The power is cut and the display turns off.

Power setting

Place an induction-friendly pan on the cooktop to start using the product. The power or temperature
4-digit display indicates the level of regulation. Make sure the pan is not empty.
At any time you can adjust the power value by touching (+) or (-) controls from 50 to 7000W
It's the same with the 3 programmable touch P1, P2, P3.
These touch are programming by the user.
16