Telephone Installation - golmar VistaPlus Manuel D'installation

TELEPHONE INSTALLATION

F
ix the telephone.
Avoid placing the telephone near sources of heat, in dusty
locations or smoky environments. The telephone can be
fixed using an electrical embedding box or directly on the
wall, as shown on the picture. If the telephone will be
installed directly over the wall, drill two holes of Ø6mm on
the specified positions, using 6mm wall plugs and Ø3.5 x
25mm screws.
It is necessary to open the telephone for wiring and fixing
purposes. To open the telephone, insert a plain
screwdriver into the slots and rotate it as shown in the
drawing.
Pass the installation wires through the corresponding hole and connect
them as shown on the installation diagrams. Close the telephone as
shown on the picture. Once the telephone is closed, connect the
handset using the telephone cord and put it on the cradle.
117