golmar VistaPlus Manuel D'installation page 105

104
H
old the door panel on the embedding
To hold the door panel on the embedding box,
insert the hinges in the embedding box
lockers as shown
Link the sound module with the
EL500/R5 microprocessed circuit
by using the supplied flat cable
DOOR PANEL INSTALLATION
box.
Select a direction to open the door panel; this selection should ease
the door panel wiring
The opening direction will be settled through the hinges position,
that must be passed through the header clips as shown.
For example, if the hinges are placed on both clips of the lower
header, the door panel will open downwards; if they are placed
on the right clips of both headers, the door panel will open to left
.
.
.
.