Troubleshooting - Klarstein GOLDFLAME Mode D'emploi

EN
42

TROUBLESHOOTING

Problem
The burner cannot be lighted or the flame
is not uniform around the burner.
The flame does not keep lighting to the
burner with thermocouple
The flame goes out while turning knob to
"Low" setting.
The cookware is not stable.
Check to make sure that:
• The gas holes on the burner are not
clogged.
• All of the movable parts of burners are
fixed correctly.
• There is no air flow around the
cooking surface.
• You press the knob all the way.
• You keep pressing the knob
for enough time to activate the
thermocouple.
• The gas holes are not clogged
in the area corresponding to the
thermocouple.
• The gas holes are not clogged.
• There is no air flow around the
cooking surface.
• The minimum has been adjusted
correctly (see the section entitled
"Minimum Regulation").
• The bottom of the cookware is
perfectly flat.
• The cookware is centred correctly on
the burner.
• The support grids have not been
inverted.