Using The Upholstery Wash Tool - Vax DualPower PRO ADVANCE W85-PL-T-E Mode D'emploi

Using the upholstery wash tool

The carpet washer should be in the upright position when using the upholstery tool, de-activating the SpinScrub brushes
1
Turn wash/rinse dial to
'wash'.
4
Slide upholstery tool over tab at end of hose until it clicks into
place.
NOTE
and brushbar.
2
Pull down accessory hose
connector cover.
3
Push hose end and hose
connector into hose and
solution connection port.
5
Plug into mains, press the
On/Off button to switch on.
9