Vax DualPower PRO ADVANCE W85-PL-T-E Mode D'emploi page 13

Changing the brushbar - continued
7
Pull and slide right side brushes together with brushbar.
Remove side cap from brushbar and unloop brushbar from belt.
9
Line up the 'right' side brushes with base and slide
into place. Attach brushbar to side brushes.
11
Refit belt guard and tighten x2 screws. Refit and tighten
screws x2 on either side of side brushes. Refit SpinScrub
brushes. Refit the rugguards and tighten screws.
8
Loop replacement brushbar through belt and onto belt grip.
10
Attach the other side of brushbar to side brushes.
Slide onto side of base and into place.
13