Using The Hose And Spinscrub Tool - Vax DualPower PRO ADVANCE W85-PL-T-E Mode D'emploi

Using the hose and SpinScrub Tool

Test for colourfastness - Wet a white absorbent cloth with the solution. In a small hidden area of your carpet/rugs/upholstery gently rub with the dampened cloth.
Wait ten minutes and check for colour removal or bleed with a white paper towel or cloth. If your carpet has more than one colour, check all colours.
1
Pour required
amount of cleaning
solution into the
clean water/solution
tank.
6
Slide SpinScrub tool over tab at end of hose until it
clicks into place.
10
2 3
Fill the clean water/
solution tank
with warm water
(max 40'C).
7
CAUTION
! !
4
Turn wash/rinse Pull down accessory
dial to 'wash'. hose connector
cover.
8
Plug into mains, Press trigger on hose
press the On/Off to release solution/
button to switch on. water.
5
Push hose end
and hose solution
connector into
hose and solution
connection port.
9
Squeeze trigger
on the forward
stroke, release
trigger on backward
stroke to recover
solution/ water.