Klarstein 10033015 Mode D'emploi page 64

EN
64
Failure Display and Inspection
The induction hob is equipped with a self diagnostic function. With this test the
technician is able to check the function of several components without disassembling or
dismounting the hob from the working surface.
Error Code Possible causes
F3/F4 Temperature sensor of the
induction coil failure
F9/FA Temperature sensor of the
IGBT failure.
E1/E2 Abnormal supply voltage
E3 High temperature of the
induction coil temperature
sensor
E5 High temperature of the IGBT
temperature sensor
What to do
Please contact the supplier.
Please contact the supplier.
Please inspect whether power
supply is normal. Power on
after the power supply is
normal.
Please contact the supplier.
Please restart after the hob
cools down.