Klarstein 10033015 Mode D'emploi page 49

Start cooking
Touch the ON/OFF control. After power on, the
buzzer beeps once, all displays show "-" or "- -",
indicating that the induction hob has entered the
state of standby mode.
Place a suitable pan on the cooking zone that
you wish to use. Make sure the bottom of the pan
and the surface of the cooking zone are clean and
dry.
Touching the heating zone selection control, and
a indicator next to the key will flash.
Set a power level by touching the [-] or [+], or slide
along the "—"control, or just touch any point of the
"—".
• If you don't set the power within 1 minute, the
induction hob will automatically switch off. You
will need to start again at step 1.
• You can modify the heat setting at any time
during cooking.
• If slide along the "—", power will vary from
stage 1 to stage 9.
EN
49