Timer Control - Klarstein 10033015 Mode D'emploi

TIMER CONTROL

You can use the timer in two different ways:
1. You can use it as a minute minder. In this case, the timer will not turn any cooking
zone off when the set time is up.
2. You can set it to turn one or more cooking zones off after the set time is up.
Using the timer if you are not selecting any cooking zone
Make sure the cooktop is turned on.
Note: you can use the minute minder even if you're
not selecting any cooking zone.
Touch [-] or [+] of the timer control, the minder
indicator will start flashing and "00" will show in the
timer display.
Set the time by touching the [-] or [+] control. Hint: Touch the [-] or [+] control once to
decrease or increase by 1 minute. Hold the [-] or [+] control of the timer to decrease
or increase by 10 minutes. If the setting time exceeds 99 minutes, the timer will
automatically return to 0 minute. Cancel the time by touching the [- -] of timer and
scrolling down to "0".
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
Buzzer will beep for 30 seconds and the timer
indicator shows "- -" when the set time finished.
EN
55