Standard Tv Users; Resetting The Player; Dvd-Video Regions; Selecting Languages Using The Language Code - Pioneer DV-410V-K Mode D'emploi

Standard TV users

09
If you have a standard TV, the
setting (page 37) of this player should be set to
4:3 (Letter Box) or
on which you prefer.
Set to 4:3 (Letter Box)
shown with black bars top and bottom.
Set to
4:3 (Pan & Scan)
shown with the left and right sides cropped.
Although the picture looks larger, you don't
actually see the whole picture.
Please note that many widescreen discs
override the player's settings so that the disc is
shown in letter box format regardless of the
setting.
Note
• Using the
16:9 (Wide)
(Compressed)
TV, or either of the 4:3 settings with a
widescreen TV, will result in a distorted
picture.

Resetting the player

Use this procedure to reset all the player's
settings to the factory default.
1 Switch the player into standby.
2 Using the front panel buttons, hold
down the  (stop) button and press
 STANDBY/ON to switch the player back
on.
All the player's settings are now reset.
44
En
TV Screen
4:3 (Pan & Scan) , depending
, widescreen discs are
, widescreen discs are
or
16: 9
setting with a standard 4:3

DVD-Video regions

All DVD-Video discs carry a region mark on the
case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD player also has a region mark,
which you can find on the rear panel. Discs
from incompatible regions will not play in this
player. In this case the attention sentence
Incompatible disc region number Can't play
disc is displayed on screen. Discs marked
will play in any player. The diagram below
shows the various DVD regions of the world.
1
2
4
Selecting languages using
the language code list
Some of the language options (such as 'DVD
Menu Lang.' in the Initial Settings) allow you
to set your preferred language from any of the
136 languages listed in the language code list
on page 50.
1 Select 'Other Language'.
Use the / (cursor left/right)
2
buttons to select either a code letter or a
code number.
Use the / (cursor up/down) buttons
3
to select a code letter or a code number.
See Language code list on page 50 for a
complete list of languages and codes.
ALL
5
1
6
2
3
5
2
4