SATA jet 1000 B Mode D'emploi page 116

Operating Instructions SATAjet 1000 B (RP/HVLP)
EN
6.2. Specific Safety Instructions for Spray Guns
• Local safety, accident prevention, work and environment protection
regulations are mandatory!
• Never direct a spray gun at human beings or animals!
• Use, cleaning and maintenance by skilled personnel only!
• People whose ability to react is impaired by drugs, alcohol, medication
or for other reasons are not allowed to use a spray gun!
• Never operate spray gun if it is damaged or if parts are missing! Only
use spray gun of locking screw [1-14] is firmly in place! Tighten lock-
ing screw using original SATA combination tool with max. 1 Nm.
• Before use, the spray gun should always be checked and repaired, if
necessary!
• Put spray gun immediately out of operation when damaged, discon-
nect it from the compressed air circuit!
• Never manipulate or technically modify the spray gun!
• Use original SATA spare parts and accessories only!
• Disassemble and install components very carefully! Exclusively use
included special tools!
• Exclusively use spray gun washing machines recommended by SATA!
Please observe the operating instructions!
• Never spray materials containing acid, lye or benzine!
• Alyways keep the spray gun away from ignition sources, such as open
fire, burning cigarettes or non-explosion-proof electronic devices!
• When working with the spray gun, always limit solvents, paints or
other coating media to the quantities which are required for the paint
job! Excessive material must be returned to the designated storage
areas afterwards!
116
Warning! Attention!