Filters - GE UVW9304 Manuel De L'utilisateur Et Instructions D'installation

Filters

Be sure the circuit breaker is off and all surfaces are cool before cleaning or servicing any part of the vent hood.
The baffle filters and drip trays are dishwasher safe and should be cleaned every month, depending on the usage of
the hood
Grease Drip Tray
To install:
Place and seat the drip trays into the designated hood
track. Slide them left or right until all trays are side-by-
side in place in the track.
To remove:
Carefully, use the grease tray lip to lift the tray upwards
and out. The tray will be free of the designated hood track.
To clean:
Swish the drip tray in hot soapy water and rinse in clean
water or wash it in the dishwasher. Do not use abrasive
cleaners.
NOTE: Some discoloration of the grease drip tray may
occur in the dishwasher.
Drip Tray Replacement
Baffle Grease Filter
The baffles channel grease released by foods on the cooktop into the drip trays. The baffles also help prevent
flaming foods on the cooktop from damaging the inside of the hood.
The baffles must ALWAYS be in place when the hood is in use.
To install:
Insert the top of the baffle (side without knob) into the
track behind the control panel. Push knob side into the
back, twist to lock into place.
2
To remove:
Pull and twist knob and slowly pull filter down. Hold with
other hand and pull filter away from the track behind the
control panel.
It is important for baffles to be placed correctly to
channel grease to the drip trays and avoid grease
1
accumulation in the baffles.
To clean:
Swish the filter in hot soapy water and rinse in clean
water or wash it in the dishwasher. Do not use abrasive
cleansers.
NOTE: Some discoloration of the filter may occur in the
dishwasher.
To clean hard to reach areas of the filter, use a soft
brush.
Baffle Replacement
7
49-2000707 Rev. 3