Using The Rinse-Aid And Detergent Dispensers; Adding Rinse-Aid To The Dispenser - hestan KDW Mode D'emploi

OPERATION
(CONT.)

USING THE RINSE-AID AND DETERGENT DISPENSERS

The detergent and rinse-aid dispensers are located on the inside of the door The detergent
dispenser is on the left and the rinse-aid dispenser is on the right.
Detergent dispenser
WITH THE EXCEPTION OF THE SOAK PROGRAM, BEFORE EVERY WASHING CYCLE IT
IS NECESSARY TO ADD THE REQUIRED AMOUNT OF DETERGENT TO THE DETERGENT
DISPENSER. THE RINSE-AID, ON THE OTHER HAND, SHOULD ONLY BE ADDED AS
REQUIRED.

ADDING RINSE-AID TO THE DISPENSER

The rinse-aid helps the dishes dry faster and prevents the formation of scale deposits and
staining; it is automatically added to the water during the final rinse cycle, from the container
situated on the inner side of the door.
Optical level indicator
TO ADD RINSE AID:
1. Open the door.
2. Rotate the container cover counterclockwise by ¼ turn and remove it.
3. Add the rinse aid until the container is full (about 1/2 cup /140 ml). The optical level
indicator, on the side of the cap should be completely obscured. Refill the rinse aid
when the optical level indicator becomes clear again, or when the rinse aid warning light
illuminates.
4. Replace the cover by turning it in a clockwise direction until it is fully closed.
5. Use a cloth to remove any spillage of rinse aid which might lead to the formation of excess
foam.
Rinse-aid dispenser
Dispenser cap
Dispenser Selector
©2019 Hestan Commercial Corporation
EN
19