Using The Rinse-Aid And Detergent Dispensers; Adding Rinse-Aid To The Dispenser - hestan KDW Série Manuel D'entretien

FEATURES AND CONTROLS

USING THE RINSE-AID AND DETERGENT DISPENSERS

EN
The detergent and rinse-aid dispensers are located on the inside of the door
The detergent dispenser is on the left and the rinse-aid dispenser is on the
right.

ADDING RINSE-AID TO THE DISPENSER

The rinse-aid helps the dishes dry faster and prevents the formation of scale deposits
and staining; it is automatically added to the water during the nal rinse cycle, from
the container situated on the inner side of the door.
To add rinse aid:
• Open the door.
• Rotate the container cover counterclockwise by ¼ of a turn and remove it.
• Add the rinse aid until the container is full (approximately 140 ml). The optical
level indicator, on the side of the cap should be completely obscured.
Re ll the rinse aid when the optical level indicator becomes clear again,
or when the rinse aid warning light illuminates.
• Replace the cover by turning it in a clockwise direction until it is fully closed.
• Use a cloth to remove any spillage of rinse aid which might lead to the formation
of excess foam.
18
©2018 Hestan Commercial Corporation
Detergent dispenser
WITH THE EXCEPTION OF THE SOAK PROGRAM, BEFORE EVERY
WASHING CYCLE IT IS NECESSARY TO ADD THE REQUIRED AMOUNT
OF DETERGENT TO THE DETERGENT DISPENSER. THE RINSE-AID,
ON THE OTHER HAND, SHOULD ONLY BE ADDED AS REQUIRED.
Optical level indicator
Rinse-aid dispenser
Dispenser cap
Dispenser Selector