hestan KDW Série Manuel D'entretien page 17

FEATURES AND CONTROLS
TROUBLESHOOTING
The dishwasher can to signal a number of malfunctions by turning on various
indicator lights, as described below:
FAULT
Delicate Daily Wash
Soak Crystal
E1
Soak Crystal Delicate Daily Wash
E2
Crystal Delicate Daily Wash
Soak
E3
Crystal Delicate Daily Wash
Soak
E4
Crystal Delicate Daily Wash
Soak
E5
Light off
(continued)
DESCRIPTION
Acquaclear failure
Super/
Sanitize
The anti-fl ooding system has tripped.
Activates in case of water leak.
Contact Technical Service.
Safety level
The system limiting the water level in the dishwasher
Super/
Sanitize
has tripped. Interrupt the current cycle. Turn off the
dishwasher and back on again, program a new cycle
and press start. If the problem persists, contact
Technical Service.
Water heating malfunction
Super/
Sanitize
The water is not heated or is incorrectly heated. Repeat
the washing cycle; if the problem persists, contact
Technical Service.
Water temperature monitoring malfunction
Super/
Interrupt the current cycle. Switch off the dishwasher,
Sanitize
switch it back on again, program a new cycle and press
start. If the problem persists, contact Technical
Service.
Water intake malfunction
Super/ The appliance does not take in water or does so
Sanitize
incorrectly. Make sure the water connections are
correct, that the water supply tap is open and that the
fi lter is not clogged. If the prob lem persists, contact
Technical Service.
Light on Light flashing
©2018 Hestan Commercial Corporation
EN
15