Control Panel - Fender Acoustic 100 Manuel D'utilisation

Control Panel

1 2
CHANNEL 1 VOLUME
1
CHANNEL ONE INPUT:
Combination jack for channel one
accepts XLR and high-impedance
¼" inputs. Plug in instrument
or microphone here; XLR input
provides phantom power for mics
that require it (do not use ribbon
mics, which can be damaged by
phantom power).*
2
VOLUME: Adjusts channel one
volume.*
3
PHASE: To help reduce feedback,
press to reverse channel one
speaker polarity.* Press both
PHASE buttons simultaneously
to initiate Bluetooth pairing (see
page 5).
3
3 4 5
PHASE LOW MID
4
LOW: Adjusts channel one bass
tone.*
5
MID: Adjusts channel one
midrange tone.*
6
HIGH: Adjusts channel one
treble tone.*
7
FX LEVEL: For channel one,
determines intensity of effect
chosen using FX SELECT
control (8). Optional footswitch
(opposite) enables tap-tempo
delay time control for echo, delay,
delay plus chorus and delay plus
reverb effects. For both channels,
no effect is heard in fully
counterclockwise position.*
6 7
HIGH FX LEVEL
8
FX SELECT: Choose among
channel one effects including
room and hall reverb, echo,
delay, chorus, Vibratone, delay
plus chorus, and delay plus
reverb, as indicated by EFFECTS
DISPLAY (12). No effect is
selected in fully clockwise and
fully counterclockwise positions.*
9
AUX IN: 1/8" stereo input. Plug in
external audio player here; use
external device's volume control
to adjust accompaniment
volume level.
10
POWER INDICATOR: Illuminates
when Acoustic 100/200 is on.
9 11
10
AUX IN PHONES
ROOM
HALL
ECHO
8
DELAY
CHORUS
VIBRATONE
DLY+CHO
FX SELECT FX SELECT
DLY+REV
12
11
PHONES: 1/8" stereo headphone
output automatically mutes
speaker output.
12
EFFECTS DISPLAY: LEDs illuminate
to show effects setting in use for
each channel.
Indicates identical channel two
*
feature on opposite side of control
panel.
NOTE: See FOOTSWITCH section
(opposite) for other features not
found on control panel, including
preset control, remote effects on/off,
tap-tempo control for delay times,
and built-in tuner.