Control Panel - Fender TONE MASTER SUPER REVERB Mode D'emploi

The Tone Master Super Reverb amplifier uses massive digital
processing power to achieve a single remarkable sonic feat:
faithfully modeling the circuitry and 45-watt power output
of an original Super Reverb tube amp. Using a high-perfor-
mance 200-watt digital power amp to achieve the headroom
and dynamic range of a real vintage Super Reverb tube amp,
paired with the pronounced power and clarity of four Jensen®
P10R speakers and a lightweight cabinet, the result is tubeless
Super Reverb tone, volume and dynamics virtually indistin-
guishable from the all-tube original. And with all these fea-
tures, the Tone Master Super Reverb is in fact about only half
the weight of an all-tube Super Reverb.
NORMAL CHANNEL INPUTS: Connect instrument here.
A.
Normal input 1 produces full sensitivity; normal input 2
has adjusted sensitivity (-6dB) for slightly darker tone and
cleaner response with high-gain instruments.
NORMAL CHANNEL BRIGHT SWITCH: High-frequency
B.
boost for normal channel.
NORMAL CHANNEL VOLUME: Controls volume level of
C.
both normal channel inputs.
NORMAL CHANNEL TREBLE: Controls treble response of
D.
both normal channel inputs.
NORMAL CHANNEL BASS: Controls bass response of both
E.
normal channel inputs.
VIBRATO CHANNEL INPUTS: Connect instrument here to
F.
use built-in "vibrato" (tremolo) and reverb effects. Input 1
produces full sensitivity; input 2 has adjusted sensitivity
(-6dB) for slightly darker tone and cleaner response with
high-gain instruments.
VIBRATO CHANNEL BRIGHT SWITCH: High-frequency
G.
boost for "vibrato" (tremolo) channel.
TONE MASTER SUPER REVERB

CONTROL PANEL

Front panel features give guitarists a playing experience iden-
tical to the tube version, including Fender's world-standard
reverb and tremolo effects. Additional rear-panel features
deliver modern convenience and flexibility—including an out-
put power selector for full power and five attenuated settings,
balanced XLR line output with impulse response (IR) cabinet
simulations, mute switch for silent stage or recording use, USB
port for firmware upgrades, and more.
Register your Tone Master Super Reverb online at start.fender.com.
VIBRATO CHANNEL VOLUME: Controls volume level of both
H.
vibrato channel inputs.
VIBRATO CHANNEL TREBLE: Controls treble response of
I.
both normal channel inputs.
VIBRATO CHANNEL MIDDLE: Controls midrange response
J.
of both vibrato channel inputs.
VIBRATO CHANNEL BASS: Controls bass response of both
K.
vibrato channel inputs.
REVERB: Controls reverb effect level. No reverb is heard when
L.
control is turned fully counterclockwise. Reverb can also be
turned on and off using included two-button footswitch.
SPEED: Controls "vibrato" (tremolo) effect rate.
M.
INTENSITY: Controls "vibrato" (tremolo) effect
N.
depth. No effect is heard when control is turned fully
counterclockwise. Effect can also be turned on and off
using included two-button footswitch.
POWER JEWEL: Illuminates red when amplifier is
O.
on; flashes between red and amber during warmup.
Illuminates amber in MUTE mode (R).
1
®