Auto Answer - JVC KD-DB98BT Manuel D'instructions

BLUETOOTH®
To
While having two active calls...
End current call and activate
held call
Swap between the current call
and held call
Adjust the phone volume * 1
[00] to [35] (Default: [15])
Switch between hands-free and
private talk modes *
2
*
1
This adjustment will not affect the volume of the other sources.
* 2
Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone....
1 Press and hold .
2 Press to select an item (see the following table), then press
.
3 Repeat step 2 until the desired item is selected or activated.
4
Press to exit.
To return to the previous setting item, press
MIC GAIN LEVEL –10 to LEVEL +10 (LEVEL –04): The sensitivity of the microphone increases
as the number increased.
NR LEVEL LEVEL –05 to LEVEL +05 (LEVEL 00): Adjust the noise reduction level until the least
noise is being heard during a phone conversation.
ECHO CANCEL LEVEL –05 to LEVEL +05 (LEVEL 00): Adjust the echo cancellation delay time until
the least echo is being heard during a phone conversation.
On the faceplate
Press and hold or
Press .
Press during a call.
Press during a call.
.
Make the settings for receiving a call
1 Press to enter Bluetooth mode.
2 Press
. then press
3 Repeat step 2
To return to the previous setting item, press
SETTINGS

AUTO ANSWER

01 SEC to 30 SEC: The unit answers incoming call automatically
in the selected time (in seconds). ; OFF: Cancels.
RING COLOR COLOR 01 to COLOR 49 (COLOR 08): Selects the illumination
color for the symbolic button as notification when there is an
incoming call and during a call. ; OFF: Cancels.
Default: XX
to select an item (see the following table),
.
until the desired item is selected or activated.
.
Default: XX
13
ENGLISH