GE Profile PTDS850GMWW Manuel De L'utilisateur Et Instructions D'installation page 19

CONNECTING THE DRYER TO THE
GAS SUPPLY
Install a female 3/8 NPT elbow at the end of
A
the dryer gas inlet.
Install a 3/8 flare union adapter to the female
elbow.
IMPORTANT: Use a pipe wrench to securely hold
on to the end of the dryer gas inlet to prevent
twisting the inlet.
NOTE: Apply pipe compound or Teflon
the threads of the adapter and dryer gas inlet.
Adapter
Elbow
Apply Pipe Compound
Attach the flexible metal gas line connector
B
to the adapter.
Tighten the flexible gas line connection using
C
two adjustable wrenches.
Installation Instructions
tape to
®
Dryer Gas Inlet
CONNECTING THE DRYER TO THE
GAS SUPPLY (cont.)
Install a 1/8 NPT plugged tapping to the dryer
D
gas line shut-off valve for checking gas inlet
pressure.
Install a flare union adapter to the plugged
tapping.
NOTE: Apply pipe compound or Teflon
the threads of the adapter and plugged tapping.
Apply pipe compound or
Teflon tape to all male
®
threads.
Shut-off Valve
Tighten all connections using two adjustable
E
wrenches. Do not overtighten.
Open the gas shutoff valve.
F
19
tape to
®
Plugged
Tapping