Driving The Tractor; For 24 Speed Models With Super Underdrive; For Models With Dual Power And Reverser - GOLDONI 3050 STAR Mode D'emploi

4.4 DRIVING THE TRACTOR

Parking brake (n.13 fig.1) lowered.
Disengage the clutch by pressing in pedal n.1 fig.1
Do not ride the clutch as this will cause excessive wear on the thrust bearing.

4.4.1 For 24 speed models with Super Underdrive

Select the speed range with the range lever n.3 fig.1. Positions (vedi fig.7):
N = Neutral
L = Creep
V = Fast
R = Reverse
Then select the gear using lever n.4 fig.1 in the combinations shown in fig.8.
Another 12 speeds can be had using the super underdrive lever n.5 fig.1, as
shown in fig.9:
N = Neutral
1 = Creep
2 = Normal

4.4.2 For models with Dual Power and reverser

Use lever n.5 fig.1 as follows (see fig.10):
1st) select 16+8 (Dual Power) or 8+8 speeds (reverser).
In 16+8 speed mode the lever (n.3 fig.1 and see fig.11) can be used to give:
N = Neutral
L = Creep
V = Fast
R = Reverse
With the Dual Power control lever (n.4 fig.2), the following speed ranges can
be selected (fig.12):
N = Neutral
V = Fast
R = Dual power reduction 20%
In 8+8 speed mode lever (n.3 fig.1 and see fig.7) can be used for:
N = Neutral
L = Creep
V = Fast
R = Range with inhibitor: cannot be selected.
Lever n.4 fig.2 can be used for the following speeds (fig.12):
N = Neutral
V = Forward
R = Reverse
77