GOLDONI 3050 STAR Mode D'emploi page 84

5.3.3 Cab air filter
Warning: the cab air filter has not been designed to retain harmful
substances! Comply with the instructions provided by the
manufacturer of the substance used.
5.3.3.1 Filter
The air that enters the cab is always subjected to a filtering treatment. The filter
is installed in the top front part of the cab. See fig. 34
5.3.3.1 Activated carbon filters (optional)
Comply with the use and maintenance instructions supplied with the filter.
Warning: use of the cab air filter with activated carbon does not
relieve the operators from wearing recommended personal
protective equipment to safeguard against the harmfulness of the
individual substances used.
5.3.4 Switches
The cab switches are installed in the ceiling of the cab itself, on the right-hand
side. They are used for the following functions (some of which are optional):
See fig.1 and 32
N° 5 Front field lights
N° 6 Front and rear window wipers and washers.
N° 7 Revolving beacon
N° 8 Rear field lights
N° 9 Ceiling light
See fig.33
N° 2 Rear window wiper
5.3.5 Cab fuse box
Eliminate the fault that caused the short-circuit before replacing a fuse. The
fuses protect the following components (fig. 35):
A = Power supply for revolving beacon switch, cab ceiling light (10A)
B = Power supply for front field light switch (15A)
C = Power supply for rear field light switch (7.5A)
D = Air conditioning power supply (20A)
E = Power supply for headlight connector (20A)
F = Switch for windscreen wiper-washer, front and rear washer motor (20A)
84