Diagnostic Messages - Teuco Hydroline Manuel De L'utilisateur

EN

DIAGNOSTIC MESSAGES

INSUFFICIENT HYDRO PRESSURE
The hydromassage will not start; the HYDRO key
is lit at high intensity and flashing at high frequency.
After 5 minutes the display returns to standby.
Suction openings dirty or clogged.
Clean the suction openings.
NO HYDRO LEVEL
(BASIC E - BASIC G)
The hydromassage will not start; the HYDRO key
is lit at high intensity and flashing at low frequency.
After 30 minutes the display will return to standby.
Add water to the tub .
1°, 2° AND 3° INSUFFICIENT SANITIZER
(BASIC E)
The hydromassage starts up, but the SANITIZE
key is lit at high intensity and flashing at low
frequency.
After 20 seconds the SANITIZE key will go back to
being lit at high intensity.
Add sanitizer.
4° INSUFFICIENT SANITIZER
(BASIC E)
The hydromassage will not start; the SANITIZE
key is lit at high intensity and flashing at low
frequency.
After 5 minutes the panel will return to standby.
If the HYDRO or SANITIZE key is pressed, the
panel will return to standby.
Add sanitizer.
HYDRO BASIC
15