Accessories; Bam Tg-Mp-028 Magnet; Mounting Set For T-Slot (Bam Mc-Mp-056-01-2-T5); Mounting Set For C-Slot (Bam Mc-Mp-056-01-2-C3) - Balluff BMP 01-EL1PP 1A 00-P S75 Série Notice D'utilisation

BMP 01-EL1PP _ 1A- _ _ _ _ -00 -P _ _ /P _ _ -S4/P _ _ -S75
Magnetic Field Positioning System
9

Accessories

Accessories are not included in the scope of delivery and
must be ordered separately.
9.1

BAM TG-MP-028 magnet

Order code: BAM039T
Fig. 9-1: BAM TG-MP-028 magnet
9.2 Mounting Set for T-Slot
(BAM MC-MP-056-01-2-T5)
Order code: BAM0383
– 2 T-slot nuts
– 2 screws
2x 2x
Fig. 9-2: T-Slot mounting set
2x 2x
9.3 Mounting set for C-Slot
(BAM MC-MP-056-01-2-C3)
Order code: BAM0382
2x 2x
– 2 C-slot nuts
10x
– 2 screws
2x 2x
2x 2x
Fig. 9-3: C-Slot mounting set
10x
9.4 Mounting screws (BAM MC-AM-055-056-2)
2x 2x
Order code: BAM0381
10 screws
10x
Fig. 9-4: Mounting screws
30 english
9.5 Holders for round cylinders
(BAM MC-MP-054-01-R)
Order code: BAM037Z
2 holders for round cylinders
22.5
Fig. 9-5: Holder for round cylinder
9.5.1

Hose clamps for attaching the holder

The hose clamp may have a maximum width of 6 mm and
must be produced from non-ferromagnetic material.
Fig. 9-6: Hose clamp
Piston
diameter
Width Diameter
10/20 mm 5 mm 18...29 mm
30 mm 5 mm 28...39 mm
40 mm 5 mm 38...49 mm
50 mm 5 mm 48...59 mm
Tab. 9-1: Hose clamps for corresponding piston diameter
9.5
6.5
Hose clamp
Order code
BAM00N4
BAM00N5
BAM00N6
BAM00N7