Us In G The F Ee D C Hute And P U Sh Er S; Us In G The S Pe Ed Con T Ro L S - Black & Decker FP3300SKT Mode D'emploi

4. Attach your selected blade or disc to the blade shaft in the
bottom of the large workbowl (instructions for individual
discs/blades follow in this manual).
5. Place the lid on top of the workbowl, aligning the tabs and
locking it into place by turning counterclockwise. The lid is
locked when it clicks firmly into place. The lid will only lock
when the feed chute is aligned with the workbowl handle. (B)
US IN G THE F EE D C HUTE
AND P U SH ER S
Note: Before operating the food processor, be sure the
workbowl, blades and lid are properly assembled on the food
processor base.
LARGER FOODS
1. Insert the small food pusher inside of the large food pusher.
Use them together to guide ingredients through the large feed
chute. (C)
SMALLER FOODS OR LIQUIDS
1. Insert the large food pusher into the large feed chute of the
lid. (D) Push down until the large food pusher clicks into
place and rests at the bottom of the feed chute.
2. Place food to be processed in the opening of the large food
pusher. Use the small food pusher to guide ingredients through
the center of the large food pusher. The small food pusher can
be removed to add liquid or additional foods. (E)
Note: The large food pusher must remain in the large feed chute
in order for the processor to operate.

US IN G THE S PE ED CON T RO L S

Note: If the food processor does not run, make sure the workbowl
and lid are properly locked on the base and the large food pusher is
fully in place. There is an automatic safety lock that causes the food
processor to stop working if the large food pusher pops out and/or
the lid and workbowl are not properly locked in place.
The controls are located on the front of the base. See the speed
chart for food processing and speed recommendations. Various
speeds are used for chopping, mixing, and slicing/shredding. When
these functions are selected the processor will run continuously
until the OFF|PULSE button is pressed to stop. (F)
1. Plug in the appliance to turn it on.
2. Select low, medium or high speed depending on what task
you are completing. Press and release PULSE button to pulse.
5
B
C
D
E
F