Black & Decker FP3300SKT Mode D'emploi page 11

STO R AG E
Store all the accessories in the food processor.
1. Lock workbowl into position on food processor base.
2. Carefully insert the blade shaft into the S Blade. When the S Blade gets to the bottom of
the shaft, turn clockwise to lock. You will feel it lock into place.
3. Insert the blade shaft, with S Blade attached, into the dough blade.
4. Place blades and shaft attachment in workbowl on center post.
5. Insert your fingers in the 2 large holes on the reversible slicing/shredding disc and place
disc onto blade shaft in workbowl.
6. Place lid on workbowl and lock into place by rotating lid clockwise.
7. Insert the large food pusher into the large feed chute of the lid.
8. Insert the small food pusher.
9. Wrap cord underneath unit and store.
TR OU B L E SHOOTI N G
PROBLEM
Food Processor
doesn't run
Food processor not
shredding or slicing
properly
If lid won't close
If the problem is not due to one of the above items, see the "Warranty and Customer Service"
section of this Use and Care Manual. Do not return the food processor to the retailer. Retailers
do not provide service.
SOLUTION
• Make sure the work bowl and lid are properly aligned and
locked in place and the large food pusher is inserted in the
feed chute.
• Check to make sure the food processor is plugged in.
• If you have a circuit breaker box, be sure the circuit is closed.
• Unplug the food processor, and then plug it back into the outlet.
• Make sure the disc is installed properly.
• Make sure ingredients are suitable for slicing or shredding.
• Make sure the disc is installed correctly.
• Try to close again with the large food pusher removed.
• Make sure there is no food or other object blocking the
interlock system.
11