Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Flame adjustment
Oven burner
The burner is correctly adjusted when the flame
is stable, silent and goes out without any noise.
• When the flames are too short, the nozzle
is whistling or the flames have the tendency
to detach from the burner, it means that
there is too much air in the valve. If there is
too much air there is a risk that the flames
will extinguish.
• But, if the flames are too long, soft, lighting,
there is not enough air in the valves. These
flames discolour the bottom of pans.
• Loosen the fixing screw M.
• Move the air adjuster A forward or
backward until achieving the right mixture;
• Tighten the fixing screw M.
Adjustment of minimum level
Oven burner
•
Remove the top pan support as well as the
burner caps and the burner crowns.
•
Light the burner knob in the maximum
position and leave the oven door closed for
about 10 mins.
•
Turn the knob slowly to the minimum
position.
•
Pull off the knob to adjust minimum flow.
•
Unscrew or screw the by-pass screw until
a regular small flame is reached.
•
For LPG completely tighten the by-pass
screw.
The flame shouldn't extinguish when closing
the oven door.
correct
no air
adjusting
excess
of air
M
A
21
Publicité
Table des Matières
