Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Important
Once installation is complete, check the
perfect seal of every pipe fitting, using a
soapy solution, never a flame.
Ensure that the rubber hose is not in contact
with any part of the back of the cookers as is in
the figure and that the loop of the hose when
connected is not in contact with the floor when
the appliance is in position.
Installation
Positioning
Remove all the packaging and install the cooker
in a dry, ventilated room not near curtains, paper,
alcohol, petrol etc.
The cooker should be placed only on
the floor, but not on the base.
15 cm
F
A
1
1
É
T
4
2 cm
2 cm
This appliance is approved to class "1" regarding
overheating of surrounding surfaces.
59 cm
15 cm
F
1
1
É
T
4
2 cm
ou
Connection
of flexible
hose clamp
It is mandatory to keep 2 cm distance to
the adjacent furniture.
Ventilation
Gas combustion is possible due to the
oxygen in the air (2 m
power – check the rating panel of the
cooker).
It is necessary to renew the air and that the
combustion products be discharged.
A
This appliance is not connected to a
combustion products evacuation device. It
shall be installed and connected in
accordance with current installation
2 c
regulations. Particular attention shall be
given to the relevant requirements
regarding ventilation.
Connection
of flexible
hose clamp
clamp
clamp
3
air/h x kW installed
17
Publicité
Table des Matières
