Power Setting - Adventys D2I 6000 Série Mode D'emploi

D2IM-6000
Switch On the device

Power setting

When a pan is compatible with the induction technology, it is possible all to adjust the level of the power
by turning the control knob.
The red light remains lit to indicate that the device working well.
When the pan is pick-up of the cooking zone, the selected light will start to blink with a frequency of 1Hz,
which means that the pan is missing.
If the light keep blinking when a pan is on top of the cooking zone, it means that:
The pan is NOT induction friendly or the diameter of the pan is two small
Le diamètre de la casserole est trop petit pour être détecté.
After switching off, if the temperature of the vitrocéramique is greater than 60°C, the light blink.
Turn the ON/OFF control knob , the light will go on.
Knobs command
18