Adventys D2I 6000 Série Mode D'emploi page 19

D2IC-6000 ALTERNATIVE MODE KEYBOARD
Switch On the device
Connect your device to the appropriate socket on a 208/240 V60Hz single-phase network.
Press the ON / OFF button to start the product. No power is yet sent at this stage.
Then press one of the "+" POWER "keys to send the power to the pan. The power level display
then indicates the power level corresponding to the key.
The left on / off button allows you to manage the setting of the two cooking zones simultaneously.
The middle on / off buttons allow you to adjust each zone independently.
1 zone = 30 power lievelia / 2 zonea = 60 power lievelia
Switch Off the device
Press the « ON/OFF » touch to sswitch off the product. The power is cut and the display turns off.
After removing the pan from the cooktop, an « H » (stands for « Hot ») might be flashing on the display as long as
the temperature on the vitroceramic glass exceeds 60°C (140°F).
19