Charging With The Supply Unit - Philips 6000 Série Mode D'emploi

12
English
Charging
Quick charge

Charging with the supply unit

Charging in the charging stand
Charge the shaver before you use it for the first
time and when the display indicates that the
battery is almost empty.
Charging takes max. 1 hour. A fully charged shaver
has a shaving time of up to 60 minutes.
Note: You cannot use the shaver while it is
charging.
After approx. 3 minutes of charging, the shaver
contains enough power for one shave. The bottom
light of the battery charge indicator starts flashing
white slowly when the quick charge is finished.
1 Make sure the shaver is switched off.
2 Put the small plug in the shaver and put the
supply unit in the wall socket.
The display of the shaver indicates that the
shaver is charging.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
shaver.
Note: The shaver can also be charged with the
supply unit (see 'Charging with the supply unit').
1 Make sure the shaver is switched off.
2 Put the small plug in the charging stand and put
the supply unit in the wall socket.