Cleaning And Maintenance; Cleaning The Shaver Under The Tap - Philips 6000 Série Mode D'emploi

Activating the travel lock
3 sec.
Deactivating the travel lock

Cleaning and maintenance

Cleaning the shaver under the tap

1 Press the on/off button for 3 seconds to use
the travel lock mode.
While you activate the travel lock, the
indications on the display light up briefly. When
the travel lock is activated, the travel lock
symbol flashes.
1 Press the on/off button for 3 seconds.
While you deactivate the travel lock, the
indications on the display light up briefly. The
shaver switches on and is now ready for use
again.
Note: The shaver unlocks automatically when it is
connected to a wall socket.
Clean the shaver after every shave for optimal
performance.
Be careful with hot water. Always check if the
water is not too hot, to prevent burning your
hands.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
While rinsing the shaving unit, water may drip out
of the base of the shaver. This is a normal
occurrence.
19
English