Removing The Rechargeable Shaver Battery - Philips 6000 Série Mode D'emploi

Removing the rechargeable shaver battery

Only remove the rechargeable battery when
you discard the appliance. Before you
remove the battery, make sure that the
appliance is disconnected from the mains
and that the battery is completely empty.
Take any necessary safety precautions
when you handle tools to open the
appliance.
Be careful, the battery strips are sharp.
1 Remove the screw in the back of the shaver.
2 Remove the back panel.
3 Take out the power unit.
4 Bend the snap hooks aside and remove the
transparent cover of the power unit.
5 Lift out out the battery holder and cut the wires
with a pair of cutting pliers or scissors.
27
English