Charging With The Supply Unit - Philips 7000 Série Mode D'emploi

Charging with the supply unit

Charging in the charging stand (specific models only)
Note: You cannot use the appliance while it is
charging.
1 Make sure that the appliance is switched off.
2 Insert the small plug into the appliance and put
the supply unit in the wall socket.
- While the appliance is in quick charge mode,
the lights of the battery status indicator light
up one after the other. After approximately 5
minutes, the bottom light of the battery
status indicator flashes. The battery now
contains enough energy for one shave.
- While the appliance charges, first the bottom
light of the battery status indicator flashes
and then lights up continuously. Next the
second light flashes and then lights up
continuously, and so on until the appliance
is fully charged.
- When the appliance is fully charged, all three
battery indicator lights light up continuously.
After approx. 30 minutes, the light goes out
automatically.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
1 Make sure the appliance is switched off.
2 Put the small plug in the charging stand and put
the supply unit in the wall socket.
3 Place the appliance in the charging stand.
Specific models only: The light ring on the
bottom of the charging stand lights up and
rotates quickly.
15
English