Philips 7000 Série Mode D'emploi page 23

Using the Quick Clean Pod (specific models only)
4 Press the small circular piece on the handle of
the Quick Clean Pod Cartridge to break the
snap hook on the handle.
5 Place the Quick Clean Pod Cartridge into the
Quick Clean Pod.
6 Put the top of the Quick Clean Pod back onto
the base and turn it clockwise until you hear a
click.
Do not tilt the Quick Clean Pod to prevent
leakage.
Note: If you use the shaver with shaving foam,
shaving gel or pre-shave products, thoroughly
rinse the shaving heads before you use the Quick
Clean Pod.
Always shake excess water off the shaver before
you place it in the Quick Clean Pod.
1 Place the shaver upside down into the Quick
Clean Pod. The shaver automatically detects
that it is in the Quick Clean Pod.
25
English