Scope Of Delivery; Dimensions; Installation Example; Assembly - Franke AQUA500 Notice De Montage Et De Mise En Service

6.

Scope of delivery

Quanti Name
ty
1 Wall mounting box
1 Lockable water volume regulator
1 Outlet screw connection
1 Electrical T-distributor with protective cap
1 Flush connector
1 Wall protection
1 Installation and operating instructions
7.

Dimensions

8.

Installation example

9.

Assembly

Warning!
• Operate the product only with safety extra low voltage (SELV). The components
must not be earthed.
• Place the power supply (not part of the delivery , see accessories,
outside the wet area in a separate room.
• Protect the electrical connection with a residual current circuit breaker (RCD).
Failure to observe this instruction can result in death or material damage due to
electric shock or fire, for example.
☞
Lay the system line (not included, see accessories,
(to be provided by the customer) from the power supply to the valve and loop
through.
☞
Depending on the composition of the wall, special wall plugs may have to be used
(to be provided by the customer).
9.1 Create a wall recess. Choose the depth of the wall recess so that the front edge of
the wall mounting box (a) is flush with the front edge of the masonry (in front of the
tiles).
9.2 Insert the wall mounting box (a) and mark the holes for the wall mounting box.
9.3 Drill holes in accordance with these markings.
Insert the wall plugs.
9.4 Place the wall mounting box (a) horizontally into the wall recess provided and screw
it in place.
Chapter
- 5 -
Chapter 10)
10) in the empty pipe