SilverCrest SDM 1500 D2 Instructions De Montage, D'utilisation Et Consignes De Sécurité page 18

The product is not to be used if
it has been dropped, if there are
visible signs of damage or if it is
leaking .
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label .
Regularly check the power plug
and the supply cord for damages .
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard .
Protect the power cord against
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it . Keep the power cord
away from hot surfaces and
open flames and ensure that
nobody can pull on or trip over it
unintentionally .
The product must not be left
unattended while it is connected
to the supply mains .
18 GB/IE
The liquid or steam must not
be directed towards equipment
containing electrical components,
such as the interior of ovens .
The filling aperture must not be
open during use .
Burn hazards
m DANGER! Risk of burns!
Do not touch hot surfaces and
beware of escaping steam . Hold
the product by its handle only .
Steam is very hot . Never put your
hands in front of the steam jet .
Operation
Only use the product in dry
indoor rooms .
The plug must be removed from
the wall socket before the water
tank is filled with water .
The use of extension cords is not
recommended . If the use of an
extension cord is necessary, it
must be designed for a current
flow of at least 10 A . Lay cords
in such a way that they may not
be tripped over or otherwise
damaged .