Radio Mode - Renkforce AN-8015BT Mode D'emploi

Radio Mode

Receiving concept RDS
The abbreviation RDS stands for Radio Data System, i.e. inaudible, additional information codes are transmitted by
the FM RDS station.
The car radio is able to evaluate these coded data that are transmitted by most of the radio stations.
The following important data is transmitted:
- Program Identification (PI)
- Traffic Program (TP)
- Traffic Announcement (TA)
- Program Service (PS)
- Alternative Frequencies (AF)
- Program Type (PTY)
- EON Information (enhanced other networks)
- Clock time (CT)
Program Identification (PI)
This information helps the receiver to identify a station. It enables the receiver to differentiate between areas where
the same programme is transmitted. The car radio only switches to a stronger station when the reception grows
weaker if the stronger station transmits the same programme identification.
Traffic Programme (TP)
This signal enables the receiver to detect that a station with a traffic programme is being received.
Traffic Announcement (TA)
With this signal the device can detect a traffic announcement and interrupt the current playback of a different audio
source.
66
Operating Instructions

English