Connecting The Aerial; Hands-Free Microphone Connection - Renkforce AN-8015BT Mode D'emploi

• The constant current terminal +12V (4) must be connected to a cable that also supplies 12V permanently when
the ignition is off (terminal 30 of the on-board network). This terminal serves to save the user settings, time, etc.
• The aerial control output (5) supplies a voltage of +12V when the device is switched on. This cable can be used
for the power supply of an electrical aerial and for the voltage for switching on a car amplifier.
• The ignition terminal +12V (7) must be connected to a cable that is only live with +12V when the ignition is on
(terminal 15 of the on-board networks).
Do not connect this terminal to continuous current; otherwise the on-board battery could be discharged when the
vehicle is parked for a longer period of time.
• Connect the earth connection (8) with the vehicle body.

Adhesive techniques which become ever more common and painted metal parts impair the electric
conductivity. Therefore, not every metal part is a suitable earthing point.

Connecting the Aerial

• Connect the aerial plug of your vehicle with the aerial socket ANT at the back of the radio.
• If your vehicle has a different aerial plug, please use a suitable adapter, available in specialist shops.

Hands-Free Microphone Connection

• Connect the plug of the hands-free microphone to the MIC connection at the back of the device.
59