Instruction Warnings; Safety And Right Use Warnings; Warranty; Settings - Bartscher EROSBM Mode D'emploi

1. Instruction Warnings

User has to hold the whole instructions. User must store up this document in case of use.
The manufacturer is not responsible of any damage incurred due to the failure of improper
use of this manual.
All measures in this manual are in mm.

2. Safety and Right Use Warnings

The Bartscher products meet the latest technological evolutions and current
safety guidelines.
Trolley line EROS, object of this booklet, is projected to be in compliance
with directives and field laws, in order to guarantee a safe and reliable
product.
Any other use will be considered inappropriate to the original destination. The
producer is not responsible of any damage caused by an improper use. Responsibility lies
only on user.
A proper use also includes compliance with the instructions for use and installation and
any additional documentation as well as the conditions of inspection and maintenance.

3. Warranty

We thank you for purchasing a Bartscher product, designed and produced for a
professional environment. Due to commercial and construction requirements, the
manufacturer reserves the right to make changes in order to enhance the quality and use
of product. Bartscher s.r.l., in compliance with European Community legislation, grants its
products for 24 months. This warranty does not include electrical parts, labour and all
replacements related to an improper use of the good. Any manipulation carried out
automatically excludes the liability of the manufacturer. The products or parts to be
replaced or repaired for unequivocal defects in workmanship and materials used must be
in a "free port" at the offices of the producer, who after a careful inspection, will repair or
replace them. The repairs are carried out exclusively at the headquarters of the
manufacturer, and none cost incurred by the customer for repairs will be refunded by the
manufacturer unless explicitly agreed.

4. Settings

This item is packed and shipped assembled. The manufacturer declines every
responsibility for damages of someone or something caused by the failure to comply with
the instructions of this manual.
Do not make any structural change to the trolley.
The elements composing the trolley (plastic, polyurethane foam, bubble wrap,
Styrofoam, cardboard and so on) must be kept away from children as potential
sources of danger and must be collected and disposed off separately in
accordance with local regulations.
The manufacturer declines every responsibility of damage of someone or something
caused by the failure to comply with the instructions of this manual.
After the unpacking of the item from its packing, proceed by removing the adhesive plastic
tape before sarting up the product. Any residual glue has to be removed carefully (do not
use abrasive cleaners).
The device is designed to run on AC to the voltage specified on the technical data plate
(located on the bottom of the tank).
2