Totaliser Function - Kübler CODIX 566 Mode D'emploi

9.5

Totaliser function

Menu Totaliser
Select value for low threshold
cut-off
Input value range
-199999 ... +999999 and DP
Select value for multiplication
factor
Input value range
0.00001 ... 9.99999
Select scale factor
Scale factor x 1
Scale factor x 0.1
Scale factor x 0.01
Scale factor x 0.001
Scale factor x 0.0001
Select decimal point for
totaliser (optical function only)
0
0.0
0.00
0.000
0.0000
0.00000
Using ACK.TOT the current (instantaneous)
measured value (throughput rate) will be added
into the totaliser memory. To convert the
throughput rate into other units FACTOR and
SCALE are available.
Negative measured values are also taken into
consideration. A decimal point that is programmed
with a current measured value is not taken into
consideration. A dummy decimal point (optical
indication only) can be programmed into the
totaliser as required.
Page 15