Restoring The Factory Settings - Dometic MAGICWATCH MWE 820 Instructions De Montage Et De Service

Setting the system
9.2 Suppressing the display of fixed objects (such as
trailer hitches) (MWE820, 860 only)
A
NOTICE!
Before making the setting, make sure that there are no additional objects
in the stop zone, such as people or other vehicles.
➤ Switch on the ignition.
➤ Engage the reverse gear.
➤ Press the button for three seconds until the loudspeaker beeps briefly.
✓ The loudspeaker emits short beeps repeatedly.
✓ The system initialises the fixed object.
➤ To end the setting, disengage the reverse gear after a period of at least three
seconds.
9.3

Restoring the factory settings

MWE820, 860
➤ Switch on the ignition.
➤ Engage the reverse gear.
➤ Press the button for longer than four seconds.
✓ The loudspeaker beeps repeatedly.
➤ Disengage the reverse gear.
➤ Engage the reverse gear again.
✓ The system has been reset to the default settings.
10
MWE820, 860, 890
EN