Technical Data; Before Starting The Equipment; Assembling The Components - EINHELL BG-PM40 P Instructions De Montage Et Mode D'emploi

Anleitung_BG_PM_40P_46P_SPK1:_
GB
Bitte beachten Sie, dass unsere Geräte
bestimmungsgemäß nicht für den gewerblichen,
handwerklichen oder industriellen Einsatz konstruiert
wurden. Wir übernehmen keine Gewährleistung,
wenn das Gerät in Gewerbe-, Handwerks- oder
Industriebetrieben sowie bei gleichzusetzenden
Tätigkeiten eingesetzt wird.
The operating instructions as supplied by the
manufacturer must be kept and referred to in order to
ensure that the lawn mower is properly used and
maintained. The instructions contain valuable
information on operating, maintenance and servicing
conditions.
Important! Due to the high risk of bodily injury to the
user, the lawn mower may not be used to trim
bushes, hedges or shrubs, to cut scaling vegetation,
planted roofs, or balcony-grown grass, to clean (suck
up) dirt and debris off walkways, or to chop up tree or
hedge clippings. Moreover, the lawn mower may not
be used as a power cultivator to level out high areas
such as molehills.
For safety reasons, the lawn mower may not be used
as a drive unit for other work tools or toolkits of any
kind.

4. Technical data

BG-PM 40 P
Engine type:
Single cylinder four-stroke engine, 118 ccm
Engine power:
Working speed:
Fuel:
Tank capacity:
Engine oil:
Spark plug:
Electrode spacing:
Cutting height adjustment: dezentral, (32/46/62 mm)
Cutting width:
L sound pressure level:
pA
K uncertainty
pA
L sound power level:
WA
Vibration a
hw
K uncertainty
Weight:
24
24.04.2012 11:52 Uhr
BG-PM 46 P
Engine type:
Engine power:
Engine output (eff.) at 2800 min
Working speed:
Fuel:
Tank capacity:
Engine oil:
Spark plug:
Electrode spacing:
Cutting height adjustment: dezentral, (32/46/62 mm)
Cutting width:
L sound pressure level:
pA
K uncertainty
pA
L sound power level:
WA
Vibration a
K uncertainty
Weight:

5. Before starting the equipment

5.1 Assembling the components

Some parts of the mower come disassembled. For
quick and easy assembly, read and follow the
instructions below.
Important! You will need the following additional
1.6 kW/2,2 HP
tools (not supplied) for assembly, and also for
maintenance work:
2800 min -1
An open-ended wrench (10 mm)
standard petrol
A ring wrench (17 mm)
approx. 1.3 l
A ratchet, extension, size 13 socket
An open-ended wrench (13 mm)
approx. 0.4 l / 15W40
A flat oil drip tray (for changing the oil)
FG RTC
A 1 liter measuring jug (oil/petrol resistant)
0.6 mm
A petrol can (5 liters is sufficient for approx. 6
operating hours)
A funnel (suitable for the tankʼs petrol filler neck)
400 mm
Household wipes (to wipe up oil/petrol residue;
75 dB(A)
dispose of these at a filling station)
A petrol suction pump (plastic, available from DIY
3 dB
stores)
96 dB(A)
An oil can with hand pump (available from DIY
5.73 m/s 2
stores)
1 liter of engine oil (15W-40)
1.5 m/s
2
24 kg
Assembling the lawn mower
1. Take the mower and attachment parts out of the
Seite 24
Single cylinder four-stroke engine, 135 ccm
2.75 kW/3,75 HP
: 1,9 kW / 2,6 PS
-1
standard petrol
approx. 1.3 l
approx. 0.6 l / 15W40
hw
2800 min -1
FG RTC
0.6 mm
460 mm
86 dB(A)
3 dB
96 dB(A)
3.57 m/s 2
1.5 m/s 2
35,5 kg