Operating The Device Safely - Dometic Waeco BordBar TF14 Notice D'utilisation

BordBar TF14
 Never pull the plug out of the socket by the cable.
 Disconnect the cooler and other power consuming devices from
the battery before connecting the quick charging device.
 Disconnect the cooler or switch it off when you turn off the
engine. Otherwise you may discharge the battery.
 The cooling device is not suitable for transporting caustic
materials or materials containing solvents.
2.2

Operating the device safely

DANGER!
D
 Do not touch exposed cables with your bare hands.
CAUTION!
!
 Before starting the device, ensure that the power supply line
and the plug are dry.
NOTICE!
A
 Do not use electrical devices inside the cooler unless they are
recommended by the manufacturer for the purpose.
 Do not place the device near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
 Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the
heat that arises during operation does not build up. Make sure
that the device is sufficiently far away from walls and other
objects so that the air can circulate.
 Ensure that the ventilation openings are not covered.
 Do not fill the inner container with ice or fluid.
 Never immerse the device in water.
 Protect the device and the cable against heat and moisture.
EN
Safety instructions
17