Betamotor ALP4T 125 cc 2006 Mode D'emploi page 152

5
A
D
GB
REPLACING THE BRAKE PADS
FRONT BRAKE
The procedure for replacing the brake
pads is provided only for information. We
recommend having the operation per-
formed by a BETAMOTOR authorized
workshop.
Follow these steps to replace the pads:
B
• Loosen the two screws A and remove
the brake caliper.
• Unscrew the two screws B.
Note: Screws B are secured very tightly
and should be loosened before removing
the caliper from the fork.
•Extract the brake pads.
•To refit the parts, follow the reverse pro-
cedure.
Ensure that the spring D shown in the figu-
re is properly seated by checking that it
offers some resistance to the insertion of
the brake pads.
To avoid braking problems, take special
care in ensuring that the screws are refitted
properly.
Whenever the brake disc is removed, ap-
ply Loctite to the screws when refitting
NOTE: When removing the brake
C
caliper, take care not to damage reed
C, as it is extremely fragile.
152